Honda is set to release a limited edition CB1100. Available only in black and limited to 300 units, this special CB1100 features “Australian spec” unpainted engine (but featuring polished parts) and unpainted wheels. It also features a Mugen slip-on exhaust but it’s unknown if there’s any performance improvements over the standard CB1100.
There’s no information available on the Honda Japan website, only this press release on the Mugen Power site.
| Honda CB1100 specifications |
|
|---|---|
| Length (m) | 2.205 |
| Width (m) | 0.835 <0.795> |
| Height (m) | 1.130 <1.100> |
| Wheelbase (m) | 1.490 |
| Ground clearance (m) | 0.125 |
| Seat height (m) | 0.765 |
| Weight (kg) | 243 <<247>> |
| Seating | 2 |
| Fuel consumption (km/ℓ) | 27.0 (60km/h) |
| Turning radius (m) | 2.7 |
| Engine type | 4-cylinder air-cooled four-stroke DOHC |
| Displacement (cm3) | 1,140 |
| Bore × stroke (mm) | 73.5×67.2 |
| Compression Ratio | 9.5 |
| Power (kW[Hp]/rpm) | 65[88]/7,500 |
| Torque (Nm[Ft·lbs]/rpm) | 92[68]/5,000 |
| Fuel supply system | Electronic fuel injection |
| Fuel capacity (ℓ) | 14 |
| Clutch type | Wet multi-plate coil spring |
| Transmission | 5 speed |
| Tyres (front) | 110/80R18M/C 58V |
| Tyres (rear) | 140/70R18M/C 67V |
<Type II>, <<ABS>> |
|
